The following infographic titled ‘Water Heater Maintenance Tips’ gives us valuable tips on the maintenance of water heaters. If properly maintained a heater will last for at least a decade if not more. A heater that is not properly maintained will not only start malfunctioning but will have a shorter life span.
Replacing a water heater can be expensive. Maintaining your water heater is a far more cost-effective strategy. Your heater will work properly, and your repair costs will always be kept low. Here are a few essential tips for the maintenance of your water heater:
Flush the water heater: Flush the tank twice a year to remove accumulated sediment. To do this turn of the cold water supply and the power. Open the pressure release valve along with a hot water tap in your bathroom. Let the water run until you see clear water.
Check pressure release valve: Pressure relief valve prevents the buildup of thermal pressure in the tank. To check the valve, place a bucket under the discharge pipe and manually open the valve. If the water flows without any trouble, your valve is working fine.
Thermostat: The optimal temperature for the thermostat is 120ºF. this willower you are electric bill while ensuring there is enough hot water for everyone.
Location: There should be four feet of empty space around your hot water heater.
Insulation: To cut down on heat loss insulate the hot water heater. You can purchase an insulating cover for this.
Check the anode rod: The anode rod attracts the corrosives to protect other parts. So check the rod once every three years and replace it if it is rusted.
For more tips on maintaining your water heater, read the infographic below.
Just imagine you are in the middle of your shower when suddenly the hot water turns ice cold and you are left all soaped up wondering what to do. You might feel that this situation might be a bit overdramatic, but it is absolutely possible if the water heating system connected to the plumbing lines suddenly stops working.
To make matters worse most plumbing lines are installed beneath the surface, and any leak or defect is almost impossible to detect unless it becomes big enough to cause a disruption in the supply lines.
That’s why taking a pro-active approach to plumbing is always a better option than waiting for something to break. You can hire plumbing services in Miami Beach to carry out regular periodic checks on your plumbing every 6 months. This strategy will help you catch small issues before they become big ones and save you time and money.
There are a large number of well-established plumbing companies in Miami that will offer you top class plumbing services for your property. You can avail yourself of a wide range of services including sewer line replacement, water heater installation, drain clearance, backflow prevention, and sewer camera inspections. So instead of adopting a reactive approach for your plumbing issues, take a pro-active approach to prevent problems.
This infographic titled ‘Common Plumbing Issues’ lists the commonly found plumbing problems in the home. Plumbing problems are bound to come up sooner or later. Pipes can develop leaks and sediment over time. Plumbing problems are often irritating to deal with as they can back up drains, clog sinks and disrupt our life in general.
Common plumbing problems
Leaking pipes: The most common leaking issue occurs with drainpipes that flush out the wastewater. This can create a smelly nuisance when the pipe leaks into the surrounding area. It is best to get a plumber to address this issue since it’s underground. They can find the source of the leak and fix it.
Sink troubles: Water pressure is an important issue. The pressure that is too high or too low can indicate the presence of an issue. The ideal pressure should be between 40 to 60 psi. Low pressure can indicate a clogged pipe, while high pressure can increase your water bill and shorten the life of your dishwasher or hot water heater.
Clogged pipes: A common problem that disrupts the water supply in your home is a clogged pipe. Sediment is a common culprit. Dirt that is carried into the pipes restrains water flow, accumulating over time narrowing the pipe. This will result in poor water pressure and uneven flow.
Common reasons behind plumbing issues:
Most plumbing issues are caused by these two reasons:
Poor maintenance: When a plumbing system is not properly maintained, it will start to develop issues like loosening joints or cracked pipes that lead to leaking pipes.
Changes in temperature: Overtime changes in temperature cause pipes to expand and contract and can cause joints to loosen.
For more information on common plumbing problems, refer to the infographic below.
Not many people understand the benefits of hiring a commercial plumbing service, but once they have an emergency, they realize how important it is to keep the plumbing in sound condition all the time, whether it is their office or residence. Once they have reached this conclusion the next logical step is to look for a good plumber for their building.
Finding a good plumber can be a tricky business because few of us know much about the finer points of plumbing. However, there are a few basic checks that you can definitely do to assess the qualifications of a company, like checking whether the plumber in Aventura has a valid license to do business in your area. Asking for references from people you know and trust and checking online reviews will also tell you a great deal about the quality of the plumber you are planning to hire for your property.
And once you have found a reliable, experienced company, consider signing a yearly maintenance contract. This may save you money and keep your plumbing running smoothly throughout the year. The peace of mind you will get in the process would be totally worth it.
The benefits of maintaining your water heater Miami are obvious. In addition to lowering your electricity bill, prolonging the life of your heater is another added benefit.
Here are some simple measures to take:
Drain at least a quarter of the tank every few months to remove accumulated debris.
First, turn off your water supply. Then attach a hose to the drain valve and let the water run until clear. If the water runs cloudy after you’ve crossed the quarter mark, open the water supply for a few minutes. This will stir the sediments that are now ready to be drained.
Insulation: New units are usually insulated but an older unit may benefit from a fiberglass jacket.
Temperature checks: Keeping the temperature as low as possible will keep your keep your bills low. 120 degrees is considered ideal. If you are leaving town, set the thermostat at the lowest setting.The valve for temperature-pressure relief should also be tested periodically.
Space: Unless the heater manual indicates otherwise, maintain a clearance of 2 feet around the water heater Miami.